PoE to USB-C Converter 44–57V to 5V/2A | IEEE 802.3af/at
PoE to USB-C Converter 44–57V to 5V/2A | IEEE 802.3af/at
Power Your 5V USB-C Devices Directly from a PoE Network
The 44V–57V PoE to Type-C Converter is the smart, compact solution for powering passive 5V USB-C devices over an existing Ethernet network. Compatible with IEEE 802.3af/at standards, this converter accepts 44V–57V Power over Ethernet input via an RJ45 port and steps it down to a clean, stable 5V/2A output through a Type-C connector — no separate power adapter required.
Whether you're setting up Raspberry Pi boards, USB-C-powered cameras, mini PCs, or other low-voltage network accessories, this converter eliminates cable clutter and simplifies your installation. Just plug into your PoE switch or injector and you're ready to go.
Made in Mainland China.
Key Features
- Wide Input Voltage: Accepts 44V–57V PoE input, fully compatible with IEEE 802.3af and 802.3at standards
- Stable 5V/2A Type-C Output: Delivers consistent power to passive 5V USB-C devices
- RJ45 Input Port: Simply connects to your existing PoE switch or PoE injector
- Compact Design: 20cm cable length keeps your installation tidy and professional
- Plug-and-Play: No drivers or configuration needed — instant setup
- Wide Compatibility: Works with Raspberry Pi, USB-C mini PCs, PoE cameras, and more
Specifications
| Input Voltage | 44V – 57V (PoE IEEE 802.3af/at) |
| Output Voltage | 5V |
| Output Current | 2A (max) |
| Output Connector | USB Type-C |
| Input Connector | RJ45 |
| Cable Length | 20cm |
| Standard | IEEE 802.3af / 802.3at |
| Origin | Mainland China |
Related Products You May Like
- Electromagnetic Induction Tester – Coil & Circuit Fault Detector
- Air Compressor Pressure Gauge 0-10/0-12/0-25 Bar | DIY Tool
- Clip-On Car Fan LED Display 199 Speeds | USB & Type-C
Learn more: ENERGY STAR product efficiency guidance
Frequently Asked Questions
Q: What devices is this PoE to Type-C converter compatible with?
A: This converter is designed for passive 5V USB-C devices such as Raspberry Pi boards, USB-C-powered mini PCs, small network cameras, and other accessories that require a 5V/2A power input. It works with any PoE switch or injector that complies with the IEEE 802.3af or 802.3at standard (44V–57V input range).
Q: Do I need a special PoE switch to use this converter?
A: No special setup is required. Simply connect the RJ45 input to any IEEE 802.3af or 802.3at compliant PoE switch or PoE injector, and the converter will step down the voltage to a stable 5V/2A output on the Type-C port. It is completely plug-and-play with no drivers needed.
Q: What is the maximum output current of this converter?
A: This converter outputs a maximum of 2A at 5V via its Type-C connector, providing up to 10W of power — sufficient for most single-board computers and low-power USB-C network devices.