Angle Grinder Drill Chuck Adapter | 3-Claw M10 100-Type
Angle Grinder Drill Chuck Adapter | 3-Claw M10 100-Type
Convert Your Angle Grinder Into a Versatile Hand Drill
The Angle Grinder Electric Drill Chuck Adapter is the ultimate quick-change accessory for 100-type angle grinders. Crafted from high-carbon steel, this three-claw chuck delivers a firm, secure grip on drill bits from 1.5 mm to 10 mm — transforming your existing angle grinder into a powerful handheld drill with zero fuss.
Made in Mainland China.
Key Features
- High-Carbon Steel Construction: Built for strength and toughness — rust-proof, high-endurance, and resistant to deformation so it stands up to demanding job-site conditions.
- Three-Claw Clamping Design: Clamps drill bits firmly and evenly across a wide range (1.5–10 mm), ensuring consistent, accurate results on every use.
- M10 x 1.5 Spindle Thread: Designed exclusively for 100-type angle grinders. Easy to install — just thread it on and you're ready to work.
- Wide Material Compatibility: Drills, cuts, and grinds through glass, metal, stone, tile, and wood with equal ease — one adapter for multiple applications.
- Lightweight & Practical: Weighing just ~160 g, this compact adapter adds virtually no bulk to your tool setup while boosting overall productivity.
- CE Certified: Meets CE safety standards for added confidence in professional and DIY environments.
Specifications
| Material | High Carbon Steel |
| Clamping Range | 1.5 – 10 mm |
| Spindle Thread | M10 x 1.5 (thick wire) |
| Compatible Model | 100-Type Angle Grinder |
| Weight | Approx. 160 g |
| Certification | CE |
Package Contents
- 1 × Electric Drill Chuck Adapter
Installation Notes
- This adapter is compatible with 100-type angle grinders only.
- Fully install the adapter onto the angle grinder before inserting any drill bit.
- When fitting a drill bit or hole opener, use the key to tighten securely.
- After installation, run the grinder idle for one minute to confirm the adapter and drill bit are properly seated and the grinder is operating normally.
Related Products You May Like
- Air Compressor Pressure Gauge 0-10/0-12/0-25 Bar | DIY Tool
- 18 Pc Basswood Carving Blocks – Whittling Wood Kit for Carvers
- Garden Pruner Shears – Secateurs for Bonsai & Fruit Trees
Learn more: OSHA on eye and face protection
Frequently Asked Questions
Q: Which angle grinders is this drill chuck adapter compatible with?
A: This adapter is designed specifically for 100-type angle grinders with an M10 x 1.5 spindle thread. It is not compatible with larger 115-type, 125-type, or other angle grinder models. Always check your grinder's spindle specification before purchasing.
Q: What drill bit sizes can this three-claw chuck hold?
A: The three-claw chuck accommodates drill bits ranging from 1.5 mm to 10 mm in diameter, making it suitable for a wide variety of drilling tasks across wood, metal, glass, stone, and tile.
Q: Is the adapter easy to install on my angle grinder?
A: Yes — simply thread the M10 x 1.5 chuck directly onto the spindle of your 100-type angle grinder. No special tools are required for attachment. Once installed, use the included key to secure your drill bit, then run the grinder idle for one minute to verify everything is properly fitted before starting work.
Q: Is this product CE certified?
A: Yes, this angle grinder drill chuck adapter carries CE certification, meeting the required safety and quality standards for use in professional and DIY woodworking or construction environments.