Adhesive Cable Clips – Cord Holder for Desk, Car & Wall
Adhesive Cable Clips – Cord Holder for Desk, Car & Wall
Keep Every Cable Exactly Where You Need It
Tired of tangled cords on your desk, dangling cables by your bed, or loose chargers sliding around your car dashboard? These adhesive cable clips are the simple, no-drill solution to tidy up any space in minutes. Made in Mainland China from durable ABS + TPE materials, each clip features a sleek 4.5 mm low-profile design that disappears into its surroundings while keeping your cables neatly in place.
Key Features
- 7 mm Cable Slot – Accommodates phone chargers, USB-C cables, HDMI cords, MacBook 140W chargers, and standard power cords. Cables can be smoothly inserted and removed with one hand.
- 60° Rotating Clamp Design – A unique locking mechanism lets you snap cables in and rotate 60° for quick, single-handed access — no fumbling, no frustration.
- No-Residue Acrylic Adhesive – The upgraded acrylic adhesive pad bonds firmly to flat, clean surfaces including wood, glass, and tiles. It's transparent, fully removable, and leaves zero sticky residue. A replacement adhesive pad is included for reuse.
- Ultra-Slim 4.5 mm Profile – At just 0.87 inches (22 mm) wide, these clips fit narrow edges, tight corners, and hidden spots without looking bulky.
- Flexible Pack Sizes – Available in 1, 6, 12, or 20-piece sets so you can tackle a single cable or your entire home office setup at once.
Where to Use Them
- 🖥️ Home Office & Desk – Mount a 12-piece kit along your desk edge for perfectly aligned, tangle-free cords.
- 🚗 Car Dashboard – Stick a 6-piece set on your dashboard or center console to keep charging cables accessible while driving.
- 🛏️ Bedside Table – Route your nightstand charger so it's always within reach — no more searching under the bed.
- 🍳 Kitchen Backsplash – Keep countertop device cables orderly and off the counter surface.
Specifications
- Material: ABS + TPE
- Cable Slot Diameter: 7 mm (0.3 in)
- Clip Width: 22 mm (0.87 in)
- Profile Height: 4.5 mm
- Colors Available: White / Black
- Compatibility: iPhone 12–16, Android USB-C, MacBook 140W chargers, HDMI, USB-A
- Country of Origin: Made in Mainland China
What's in the Box
- Cable Clip(s) × 1 / 6 / 12 / 20 (Black or White)
- Replacement Adhesive Pads × 2
Installation — 5 Easy Steps
- Wipe the surface clean with the included alcohol wipe.
- Align the clip and press firmly for 30 seconds.
- Allow the adhesive to cure for 12–24 hours for maximum hold.
- Snap your cable into the clamp.
- Rotate 60° whenever you need quick cable access.
Looking for more organization solutions? Check out our Large Capacity Pencil Pen Bag – Zipper Fabric Stationery Organizer or our Graded Trading Card Holder with Snap Closure to keep every corner of your space clutter-free.
Learn more: Ready.gov emergency supply guidance
Frequently Asked Questions
Q: Will these adhesive cable clips damage my desk, wall, or car dashboard when removed?
A: No. The upgraded no-residue acrylic adhesive is designed to be fully removable from flat, clean surfaces such as wood, glass, and tile without leaving any sticky marks or causing damage. For best results, remove slowly at a low angle.
Q: What cable sizes do these cord clips fit?
A: The 7 mm (0.3-inch) slot accommodates a wide range of cables, including iPhone chargers (12–16), Android USB-C cables, MacBook 140W chargers, HDMI cords, and standard USB-A cords. Very thick or braided cables over 7 mm in diameter may not fit.
Q: How long does the adhesive need to cure before I can use the cable clip?
A: We recommend pressing the clip firmly for 30 seconds after application and then allowing 12–24 hours for the adhesive to fully cure before loading cables. This ensures the strongest possible bond on your surface.
Q: Can I reuse the cable clips if I move them to a different location?
A: Yes! Each pack includes 2 replacement adhesive pads, so you can reposition the clips to a new spot. Simply peel off the old pad, attach a fresh replacement pad, clean the new surface, and re-apply.