12V 2-Pin LED Flasher Relay – Adjustable Turn Signal Blinker
12V 2-Pin LED Flasher Relay – Adjustable Turn Signal Blinker
12V 2-Pin LED Flasher Relay – Adjustable Frequency Turn Signal Blinker
Upgrade your motorcycle's turn signal system with this 12V 2-Pin LED Flasher Relay. Designed to work with LED indicator bulbs, this compact relay regulates blink frequency so your turn signals flash at a steady, correct rate — no more hyper-flashing or erratic blinking when you switch from incandescent to LED bulbs.
Why You Need This Relay
Standard flasher relays are calibrated for the resistance of incandescent bulbs. When you install low-draw LED turn signal bulbs, the relay detects a drop in load and causes rapid hyper-flashing. This adjustable LED flasher relay is purpose-built to work with LED loads from 5W to 100W, delivering a consistent, regulation-correct blink rate every time.
Key Features
- Universal Motorcycle Fit: Compatible with virtually all 12V motorcycle and bike turn signal systems
- Adjustable Blink Frequency: Fine-tune the flash rate to your preference or local road regulations
- Wide Load Range: Supports LED and mixed bulb loads from 5W to 100W
- Simple 2-Pin Connection: Direct plug-and-play replacement — no wiring modifications needed
- Compact & Lightweight: Small 3.6 × 2.5 × 3.5 cm footprint fits neatly behind the dash or under the seat
- 12V DC Operation: Ideal for standard motorcycle electrical systems
Specifications
| Voltage | 12V DC |
| Load Power | 5W – 100W |
| Pin Configuration | 2-Pin |
| Dimensions | 3.6 × 2.5 × 3.5 cm |
| Country of Origin | Made in Mainland China |
Package Contents
- 1 × LED Flasher Relay (2-Pin, 12V)
Related Products You May Like
- 60cm Motorcycle Luggage Strap – Elastic Helmet Bungee Net
- Air Compressor Pressure Gauge 0-10/0-12/0-25 Bar | DIY Tool
- Electromagnetic Induction Tester – Coil & Circuit Fault Detector
Learn more: FuelEconomy.gov driving efficiency guidance
Frequently Asked Questions
Q: What does a 2-pin LED flasher relay do for my motorcycle's turn signals?
A: When LED turn signal bulbs are installed on a standard motorcycle electrical system, the original flasher relay often causes hyper-flashing (very rapid blinking) because LED bulbs draw far less current than incandescent bulbs. This 2-pin LED flasher relay is designed to handle low LED loads (5W–100W) and delivers a steady, correct blink rate — making your turn signals work exactly as they should with LED bulbs.
Q: Will this relay fit my motorcycle?
A: This 12V 2-pin LED flasher relay is compatible with the vast majority of motorcycles and bikes that use a standard 2-pin flasher relay and run a 12V electrical system. Check your current relay's pin count and voltage before purchasing to confirm compatibility.
Q: How do I install the 2-pin LED flasher relay?
A: Installation is straightforward — simply locate your existing flasher relay on your motorcycle (usually behind the dash panel or under the seat), unplug the 2-pin connector, and plug in the new LED flasher relay. No wire cutting or soldering is required. The adjustable frequency dial lets you fine-tune the blink speed after installation.
Q: What is the load range supported by this flasher relay?
A: This relay supports a load range of 5W to 100W, making it suitable for all-LED setups, all-incandescent setups, or a mixed combination of LED and standard bulbs across your front and rear turn signals.